Solid carbide taps

Description

Please pay particular attention to the photographs, I try to show any defects, markings, engravings, pretty much anything that would have a negative effect on the price.
1/4 x 28 appears new
M7 x .75  Gun tap with .242 pilot
2 ea   0 - 80  taps
2 ea  2 - 56  taps
4 ea   5/16 -18  taps all appear to have been professionally reached sharpened
Spiral point taps are designed for starting new threads in power tapping applications where a through-hole is present. Spiral point ejects chips forward away from new threads being cut. Small diameter power taps may break very easily . Not guaranteed against breakage or any other failure.
My Combined Shipping Policy:
I ONLY combine items purchased within the same calendar week (Sunday thru Saturday). Exceptions can be arranged, but you need to contact me first.
We cannot issue shipping refunds after payment has been made!
To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice.
FYI: if you're interested in machinist tools stay tuned! I'm 74-year-old retired toolmaker I am liquidating most of my 40+ years of machinist tools, hundreds of reamers, counterbores, countersinks, drills etc. plus more tools dial indicators, Mikes etc. etc. over the next several months.
I have not used any of these tools in over 10 years, I have too many to clean before I sell them, so some will need to be cleaned and oiled. My eyesight isn't what it used to be, I will describe them the best I can but please check out the pictures closely.