Shars 6 x 7-1/2" Lockdown CNC Milling Machine Vise w/Base + Certificate New R[

Description

Shars 6 x 7-1/2" Lockdown CNC Milling Machine Vise w/Base + Certificate New
USE ON NC/CNC MACHINES FOR CUSTOMER WHO ONLY NEEDS ONE VISE NOT TWO OR MORE, BECAUSE OF BED HEIGHT TOLERANCE , THESE VISES CAN'T BE USED TOGETHER.
Comes with certificate
Product Code
202-1016A
Product description
Dimensions Jaw Width: 6"
Jaw Opening: 7-1/2"
Jaw Height: 1-3/4"
Accurate to
0.002”
per 4” on squareness and
0.006”
per 4” on parallelism without base and
0.008”
per 4” on parallelism with base
Weight: 108 lbs
Vise Key: 15.875mm table slot width, 18.00mm base width
Product features
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt.
This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.
Highest clamping power. It's very accurate and durable
Sliding surface of the vise bed is flame hardened and ground
Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI
With anti-jaw lifting mechanism.
K type angle lock nut is made from the highest quality ductile Iron, firm and durable
Acme screws and easy to read 0-360 deg scales
4 screws from the top through the jaw reduce key's side force and make the vise body not easy to broke, extend vise life.
Taiwan new type
The installation size of Soft Jaw is the same as Kurt. 6"
Aluminum Soft Jaws which are made in USA
can be mounted into this vise
Four setting positions of the jaw plates are available, widening the jaw plates opening.
Four ways to use the vise, shows on the following fig.
Product includes
Swivel base
Product application
Jaw Plate Bolt Hole Spacing: 3.875''
When A and C are unequal to E, you can swivel the vise base to suitable angle,
then the vise can be installed onto the Mill.
Related products
Click the product code to the item page
6 x 2 x 1" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1081
6 x 2 x 1.25" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1082
6 x 2 x 1.5" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1083
8 x 2 x 1" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1084
6 x 3 x 1" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1085
8 x 2 x 1.5" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1086
8 x 2 x 1.25" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1087
6 x 2 x 2" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1088
6 x 3 x 1.5" Aluminum Soft Jaws for 6" Kurt Type Vise USA Made
Product Code:
202-1089
We have other vises available at
My Ebay Store
:
SHARS 4" 440V Milling Vise +/-0.0004
4" wide jaw plate, 4" inner jaw opening, 10" outer jaw opening
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 2.25" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0991
SHARS 6" 690V Milling Vise +/-0.0004
6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw opening
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 2.875" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0994
SHARS 6" 660U Milling Vise +/-0.0004
6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.189" +/-0.0005"
Clamping repeatability +/-0.0004"
Lifetime limited warranty
To learn more,
click here to 202-0995
SHARS 6" 600DS Double Station Milling Vise +/-0.0002
6" wide jaw plate
4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
Jaw lift prevention mechanism by eccentric pin design
Made from 80,000PSI stress relief cast iron
Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
Bed height Tolerance 3.25" +/-0.0005"  (matched bed height at no additional cost)
Clamping repeatability +/-0.0002"
Lifetime limited warranty
To learn more,
click here to 202-0999
All Available to Ship NOW! at Fixed Prices
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept
VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at
our eBay Message Box