-40%
Mill vise stops set of (2) Low Profile for 1.0 inch milling machine vise jaws
Mill vise stops set of (2) Low Profile for 1.0 inch milling machine vise jaws
Mill vise stops set of (2) Low Profile for 1.0 inch milling machine vise jaws
Mill vise stops set of (2) Low Profile for 1.0 inch milling machine vise jaws

Mill vise stops set of (2) Low Profile for 1.0 inch milling machine vise jaws

$ 10.56

Availability: 35 in stock
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Country of Manufacture: United States
  • Model: 303 SST
  • Country/Region of Manufacture: United States
  • Brand: Future Machine

    Description

    Mill vise jaw stops. Set of (2). Low Profile for 1.0 inch milling machine vise jaws. These mills stops are made of 303 SST with hardened ground pins and a 18-8 SST 4-40 socket cap screw. They are .250 inch square X .750 inch long. The top clearance above the jaw is .175 inch. The front clearance inside the jaw is .120 inch. So you can use a .125 inch thick parallel and still close the vise. The clearance below the top of the vise (amount that grabs the jaw) is .080 inch. The open/close range is .280 inch min - 1.09 inch. So they will easily fit a 1.0 inch jaw. They are not sloppy so they clamp tight with out having to over tighten. FREE SHIPPING to United States only. Shipping outside the United States, buyer will pay actual shipping costs via USPS. Buyer pays taxes where applicable.