Kurt D675 Precision Machine Vise, 6” jaws, Refurbished/Rebuilt, New Jaws, Handle

Description

Very nice Kurt D675 precision machine vise, completely refurbished/restored. I purchased a rebuild kit and vise handle directly from Kurt and replaced items that needed replacing, including new bearings, washers, seal and half-dome. All painted surfaces were stripped to bare metal, thoroughly cleaned, then primed and painted with multiple coats of rust resistant paint in the original Kurt color.  The non-painted areas were cleaned and buffed. Grease was applied to the appropriate areas and the vise was reassembled. A new pair of aluminum soft jaws was installed.  The vise handle turns very smoothly from full open to full close with no slop in the motion. There is some wear showing in one of the jaw threads of the fixed jaw, but the holding screw tightened as it should. I don’t expect any problem with this, but it may need to be retapped in the future. Shipped via UPS Ground to the 48 continental states. Please email me for a shipping quote to Canada, Alaska, Hawaii and US Territories.