Clamp Type Knurling Tool 3-25 mm Capacity- 12 mm Shank

Description

Clamp Type Knurling Tool with knob.
This design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool
Holder Size: 3/8" Inches (Thick) x 12 mm (Wide Shank for Holding) x  Holder Size x 3" Inch Long Tail (mm)
Knurl Dim.(mm) : 19 x 9.5 x 6.35 mm Working Capacity (mm) : 3-25 mm
Pitch is Medium. LH & RH diagonal lines forms a nice diamond structure.